Pantograph and CNC milling tools

FK03

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 3 × 30 mmNon-boredWorkpiece material: Marble

FK05

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 5 × 30 mmNon-boredWorkpiece material: Marble

FK08

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 8 × 30 mmNon-boredWorkpiece material: Marble

FK20

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 20 × 30 mmNon-boredWorkpiece material: Marble

FK350

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 3 × 50 mmNon-boredWorkpiece material: Marble

FK550

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 5 × 50 mmNon-boredWorkpiece material: Marble

FK850

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 8 × 50 mmNon-boredWorkpiece material: Marble

FK2050

Two-flute cutter for low and high relief in marble, with a 1/2″ gas threaded connection.

• Dimensions: 20 × 50 mmNon-boredWorkpiece material: Marble

FK03F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 3 × 30 mmBoredWorkpiece material: Marble

FK05F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 5 × 30 mmBoredWorkpiece material: Marble

FK08F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 8 × 30 mmBoredWorkpiece material: Marble

FK20F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 20 × 30 mmBoredWorkpiece material: Marble

FK90GF

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 90° · 19 mmSingle cutting edge, boredWorkpiece material: Marble and granite

FK90GF2T

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 90° · 19 mmTwo cutting edges, boredWorkpiece material: Marble

FK350F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 3 × 50 mmBoredWorkpiece material: Marble

FK550F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 5 × 50 mmBoredWorkpiece material: Marble

FK850F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 8 × 50 mmBoredWorkpiece material: Marble

FK2050F

Bored cutter with a 1/2″ gas connection for low and high relief. Geometry and workpiece material are specified for each variant.

• Dimensions: 20 × 50 mmBoredWorkpiece material: Marble

Solid carbide helical cutters · for marble

Solid carbide helical cutter for marble, with a 1/2″ gas threaded connection.

Family photograph and variants, as in the catalogue

• FK3FDimensions: 3 × 30 mmSolid carbide · BoredWorkpiece material: Marble
• FK3Dimensions: 3 × 30 mmSolid carbide · Non-boredWorkpiece material: Marble
• FK5FDimensions: 5 × 30 mmSolid carbide · BoredWorkpiece material: Marble

FK5

Solid carbide helical cutter for marble, with a 1/2″ gas threaded connection.

• Dimensions: 5 × 30 mmSolid carbide · Non-boredWorkpiece material: Marble

FK550IF

Solid carbide helical cutter for marble, with a 1/2″ gas threaded connection.

• Dimensions: 5 × 50 mmSolid carbide · BoredWorkpiece material: Marble

FK550I

Solid carbide helical cutter for marble, with a 1/2″ gas threaded connection.

• Dimensions: 5 × 50 mmSolid carbide · Non-boredWorkpiece material: Marble

FK10CF

Solid carbide helical cutter for marble, with a 1/2″ gas threaded connection.

• Dimensions: R5 mmSolid carbide · BoredWorkpiece material: Marble

Long cutters · for marble

Long cutter for low and high relief, with a 1/2″ gas connection. Compare radius and working length by variant.

Family photograph and variants, as in the catalogue

• FKL3-175Dimensions: R 1,5 · working length 120 mmNon-boredWorkpiece material: Marble
• FKL3-175FDimensions: R 1,5 · working length 120 mmBoredWorkpiece material: Marble
• FKL5-175Dimensions: R 2,5 · working length 120 mmNon-boredWorkpiece material: Marble
• FKL5-175FDimensions: R 2,5 · working length 120 mmBoredWorkpiece material: Marble

Long cutters · for marble

Long cutter for low and high relief, with a 1/2″ gas connection. Compare radius and working length by variant.

Family photograph and variants, as in the catalogue

• FKL3-30 167Dimensions: 3 × 30 · R 1,5 · working length 110 mmNon-boredWorkpiece material: Marble
• FKL5-30 167Dimensions: 5 × 30 · R 2,5 · working length 110 mmNon-boredWorkpiece material: Marble
• FKL8-30 167Dimensions: 8 × 30 · R 4,0 · working length 110 mmNon-boredWorkpiece material: Marble

Long cutters · for marble

Long cutter for low and high relief, with a 1/2″ gas connection. Compare radius and working length by variant.

Family photograph and variants, as in the catalogue

• FKL3-30 167FDimensions: 3 × 30 · R 1,5 · working length 110 mmBoredWorkpiece material: Marble
• FKL5-30 167FDimensions: 5 × 30 · R 2,5 · working length 110 mmBoredWorkpiece material: Marble
• FKL8-30 167FDimensions: 8 × 30 · R 4,0 · working length 110 mmBoredWorkpiece material: Marble

Long cutters · for marble

Long cutter for low and high relief, with a 1/2″ gas connection. Compare radius and working length by variant.

Family photograph and variants, as in the catalogue

• FKL3-50 170Dimensions: 3 × 50 · R 1,5 · working length 110 mmNon-boredWorkpiece material: Marble
• FKL5-50 170Dimensions: 5 × 50 · R 2,5 · working length 110 mmNon-boredWorkpiece material: Marble
• FKL8-50 170Dimensions: 8 × 50 · R 4,0 · working length 110 mmNon-boredWorkpiece material: Marble

Long cutters · for marble

Long cutter for low and high relief, with a 1/2″ gas connection. Compare radius and working length by variant.

Family photograph and variants, as in the catalogue

• FKL3-50 170FDimensions: 3 × 50 · R 1,5 · working length 110 mmBoredWorkpiece material: Marble
• FKL5-50 170FDimensions: 5 × 50 · R 2,5 · working length 110 mmBoredWorkpiece material: Marble
• FKL8-50 170FDimensions: 8 × 50 · R 4,0 · working length 110 mmBoredWorkpiece material: Marble

Long cutters · for marble

Long cutter for low and high relief, with a 1/2″ gas connection. Compare radius and working length by variant.

Family photograph and variants, as in the catalogue

• FK20100Dimensions: 20 × 100 · overall length 175 · working length 120 mmNon-boredWorkpiece material: Marble
• FK20100FDimensions: 20 × 100 · overall length 175 · working length 120 mmBoredWorkpiece material: Marble

FK03PCD

CNC tool with polycrystalline diamond (PCD) cutting edges. Variants differ in geometry and dimensions.

• Dimensions: 3 × 15 mmPCD cutting edgeWorkpiece material: Marble, granite, synthetic and composite materials

FK2028PCD

CNC tool with polycrystalline diamond (PCD) cutting edges. Variants differ in geometry and dimensions.

• Dimensions: 20 × 28 mmThree PCD cutting edgesWorkpiece material: Marble, granite, synthetic and composite materials

FK05PCD

CNC tool with polycrystalline diamond (PCD) cutting edges. Variants differ in geometry and dimensions.

• Dimensions: 5 × 15 mmPCD cutting edgeWorkpiece material: Marble, granite, synthetic and composite materials

FK08PCD

CNC tool with polycrystalline diamond (PCD) cutting edges. Variants differ in geometry and dimensions.

• Dimensions: 8 × 15 mmPCD cutting edgeWorkpiece material: Marble, granite, synthetic and composite materials

FK2550

Diamond cutter for low and high relief, with a 1/2″ gas connection.

• Dimensions: 25 × 50 mm5 diamond segmentsWorkpiece material: Granite

D10

Diamond cutter for low and high relief, with a 1/2″ gas connection.

• Dimensions: 10 × 35 mmDiamondWorkpiece material: Marble and granite

D14

Diamond cutter for low and high relief, with a 1/2″ gas connection.

• Dimensions: 14 × 35 mmDiamondWorkpiece material: Marble and granite

D16

Diamond cutter for low and high relief, with a 1/2″ gas connection.

• Dimensions: 16 × 55 mmDiamondWorkpiece material: Marble and granite

FKDR3

Diamond cutter for low and high relief, with a 1/2″ gas connection.

• Dimensions: Ø 30 / 11 · overall length 147 · working length 129 mmDiamondWorkpiece material: Marble and granite

FKMR2

Diamond cutter for low and high relief, with a 1/2″ gas connection.

• Dimensions: 5 × 50 · overall length 173 mmDiamond with carbide cutting edgeWorkpiece material: Marble and granite

All-cutting bits · Ø 10 mm cylindrical shank

Bored all-cutting bit for granite, with a Ø 10 mm cylindrical shank.

Family photograph and variants, as in the catalogue

• MANG03Dimensions: 3 × 7 mmBoredWorkpiece material: Granite
• MANG03,5Dimensions: 3,5 × 7 mmBoredWorkpiece material: Granite
• MANG04Dimensions: 4 × 7 mmBoredWorkpiece material: Granite

MANG05

Bored all-cutting bit for granite, with a Ø 10 mm cylindrical shank.

• Dimensions: 5 × 7 mmBoredWorkpiece material: Granite

All-cutting bits · Ø 10 mm cylindrical shank

Bored all-cutting bit for granite, with a Ø 10 mm cylindrical shank.

Family photograph and variants, as in the catalogue

• MANG06Dimensions: 6 × 10 mmBoredWorkpiece material: Granite
• MANG08Dimensions: 8 × 10 mmBoredWorkpiece material: Granite
• MANG10Dimensions: 10 × 10 mmBoredWorkpiece material: Granite

All-cutting bits · Ø 10 mm cylindrical shank

Bored all-cutting bit for granite, with a Ø 10 mm cylindrical shank.

Family photograph and variants, as in the catalogue

• MANG12Dimensions: 12 × 10 mmBoredWorkpiece material: Granite
• MANG14Dimensions: 14 × 10 mmBoredWorkpiece material: Granite

Counterprofiles

Counterprofile to match the shape and dimensions of the cutter.

Family photograph and variants, as in the catalogue

• C03Dimensions: 3 × 30 mm
• C05Dimensions: 5 × 30 mm
• C08Dimensions: 8 × 30 mm

Counterprofiles

Counterprofile to match the shape and dimensions of the cutter.

Family photograph and variants, as in the catalogue

• C0350Dimensions: 3 × 50 mm
• C0550Dimensions: 5 × 50 mm
• C0850Dimensions: 8 × 50 mm

Counterprofiles

Counterprofile to match the shape and dimensions of the cutter.

Family photograph and variants, as in the catalogue

• C20Dimensions: 20 × 30 mm
• C2050Dimensions: 20 × 50 mm